The Mini-GIG Mixing Console is packed with features normally found in much larger and more expensive mixers. The unit features 1 mono input (provided with ultra low noise microphone pre amps and phantom power at +20 Volt) plus 1 stereo input, perfect for any line level piece of gear.
Each of these inputs have a 2-band equaliser for HI and LOW controls. There is an auxiliary control, 2-track inputs assignable to main mix and a built-in USB sound card that provides power for the mixer. The built in Bluetooth player makes this a truely perfect mobile mixer solution for small venues or performers.
Features
- Ultra-low noise discrete MIC Preamps with +20V Phantom Power
- 2-band EQ and Peak LEDs on MIC channel. 2-band EQ and Peak LEDs on Stereo channel
- Built-in USB soundcard providing also power
- Built-in Bluetooth player
- Power supply: AC 100- 240V 50Hz/60Hz
- Power consumption: 40 Watt
- Measurements: 136 x 98 x 34mm
- Weight: 0,48 Kg
Mono Channel
- Mic Input: XLR balanced
- Line input: 1/4– TRS balanced
- Freq response: 10Hz ~ 55kHz, +/- 3dB
- Distortion (THD=N): <0,03% @ 0dB, 22Hz ~ 22kHz
- Gain range: 50dB
- Input sensitivity: -35dBu ~ +15dBu
- LOW Cut: 75Hz
- SNR <-100dBr
- Phantom Power: +48V switchable
Stereo Channel
- Mic Input: XLR balanced
- Line input: 1/4– TRS/RCA unbalanced
- Freq response: 10Hz ~ 55kHz, +/- 3dB
- Distortion (THD=N): <0,03% @ 0dB, 22Hz ~ 22kHz
- Gain range: 50dB
- Input sensitivity: -20dBu ~ +20dBu
- LOW Cut: 75Hz
- SNR <-100dBr
- Phantom Power: +48V switchable
Channel EQ
- High: +/- 15dB @ 12kHz
- Mid: +/- 15dB @ 2,5kHz
- Low: +/- 15dB @ 80Hz
Impedance
- Microphone input: 1,8K Ohm
- Other inputs: >10K Ohm
- Tape output: 1K Ohm
- All other outputs: 120 Ohm